First Shad Caught in 2018

Above is a picture of the first shad caught in 2018! Well, the first shad I caught in 2018. 🙂

I met up with Todd at CS Lee around 9:30. The weather was cold, with air temps around 43 when we arrived, and a 5-10mph wind that provided a wind chill that cut through you, particularly when wading in 48 degree water. My original plan was to check out the bridge, hit the creek mouths on the way down to the Econ, and then potentially head up to Culpepper bend to do some scouting. I decided to start shallow with the single hand fly rod and a light weighted fly, thinking the shad would potentially be looking for warmer water.

Based on the gauge height of just under 4 feet and a quick look by the bridge, we determined the water was still a little high to wade around the bridge. It could be done, but figured we would be in thigh to waist high water at times, and with the cold temps, we decided to skip it. As we passed, we noticed a couple guys fishing near the bridge from a gheenoe. A message from Suede confirmed that it was them fishing, and that they did find shad near the junction.

We worked the creek mouths for an hour or two, me working shallow with the single hander, and Todd swinging deep with switch rod. Todd noticed a fish shallow, right in an area of convergence where there was a nice eddy, and some odd current upstream of it, likely caused by the wind and water coming off of the pasture. After a couple of casts with a 7.5ft T8/ 2.5 Ft Intermediate tip, Todd was the first to hook up with a nice American shad using a size 2 Gold-@ss Gotcha with a tan wing. The fish made several good jumps and a decent run before coming unhooked. Todd graciously yielded the spot to me as he thought I would be better off fishing the single hand rod shallow in that particular area due to the backward current. I worked the area using a beadchain Crazy Charlie but found no takers. Todd promptly hooked up with a Hickory (pictured) quite literally 5 feet from me which was hugging the bank.

I decided to change rods and rig up the switch rod. I rigged a 5ft T8/ 5ft Intermediate tip, 6 feet of level leader, and a size 4 Pink/ White Kip Tailed Clouser, tied with a long wing and began swinging flies through the eddy. After several attempts I hooked and landed the fish pictured up top. While I had given up on the single hand rod and was using the switch with a sink tip, after some discussion, we both agreed that the trigger was likely the larger flies. Our thoughts were, with the cold water, a small meal might not be worth the effort, but a large source of protein likely made the fish bite… IF you believe they are actually eating on their way up to spawn. 😉

The fishing was slow, so we decided to join the masses up by the Econ. When we arrived, there were two or three boats working the channel, and at one point I counted six. We were surprised there were as many people out fishing for shad this early in the season on such a cold day. We wondered if it had anything to do with this strange guy that is compelled to blog about his adventures in fishing for, and sometimes catching said shad. 🙂 Who knows? But I say the more the merrier, there is plenty of river to explore if you get tired of the crowds.

We fished the west bank, which is comfortably wadable with gauge heights under 4 feet and did not find fish. In fact, we never saw anyone catch any fish, even the boats. The west bank has been spotty in the last few years. It used to be a great place to hang all day, working your way up the Econ a couple of turns, but honestly, it is starting to get to the point I am not sure it even warrants a stop. The east bank seems to produce better in years of late, but the water is still too high to comfortably wade there. Gauge heights of under 3 feet are much preferred but be aware, high weeds can make false casting tough depending on wind. Single hand Spey casting, or Skagit/ Spey with a long rod is my preference. That said, it seemed the fish were further downriver today.

With the slow fishing we decided to head up to Culpepper bend. We motored up with the trolling motor in about 25 minutes and found no current. We worked the turn upstream of Culpepper for about 20 minutes and decided to head back. The deep cycle battery pooped out about a turn from the mouth of the Econ on the way back, so we resorted back to paddles and made our way back down to the creek mouths. We fished for another hour or so before calling it a day around 4:00. It was a fun day, despite the cold. I will likely skip going out next weekend and wait for the run to thicken up a bit before heading back out.

Hooked a shad

SR46 Bridge in the Distance

Buzzard Roost Mound

Stand of Palms on the Econ River

Stand of Palms on the Econ River